ANALISIS POTENSI BAHAYA PADA PEKERJA MENGGUNAKAN METODE HIARO (HAZARD IDENTIFICATION ASSESMENT OF RISK AND OPPORTUNITIES) DI PT XYZ

Yoga Darmawan

doi:10.36277/identifikasi.v6i1.118

Authors

Yoga Darmawan Universitas Islam Negeri Sultan Syarif Kasim Riau

DOI:

https://doi.org/10.36277/identifikasi.v6i1.118

Keywords:

HIARO, Risk Level, Potential Danger, SMK3.

Abstract

PT. XYZ is one of the companies engaged in the palm oil processing industry which often experiences high occupational accident caused by an inadequate K3 management system (SMK3), this case if left unchecked can be detrimental to the company decreased productivity as well as material losses. Costs that must be incurred by the company for each work accident case that occurs are quite large, namely RP. 59.555.539.00 in 2018. By looking at potential hazard and handling work accidents that have not been going well, this company requires hazard identification assessment of risk and Opportunities (HIARO) is one of the latest methods based on ISO 45001. The concept of HIARO takes into account the management of work, social factors (including workload, work hours) leadership, culture in the organization. The result of the study using the HIARO method of the sterilizer station after data processing for January-December 2018 total accident of 34 cases, for a total Frequency Rate value of 1167,56, for the value of Severity Rate of losses workdays of 26 days in 2018, for a total Severity Rate of 0,94. For Boiler station the total accident is 32 case, for a total Frequency Rate value of 995,86, for the value of Severity Rate of lost workdays is 42 days in 2018, for a total Severity Rate of 1,5. This figure shows that K3 Management is not good, so the writer gives a proposal that is to provide special PPE for Sterilizer and Boiler stations such as, Earplug, Handy Talkie, Heat Resistant Glove, Coverall Nomex, Doing Five Minute For Safety.

Author Biography

Yoga Darmawan, Universitas Islam Negeri Sultan Syarif Kasim Riau

Teknik Industri, Fakultas Sains dan Teknologi

References

Alamsyah, M. I. Kusumawardani, M. 2018. Analisis Penganggaran Modal dan Analisis Risiko dalam Proyek Ekspansi Pasar pada Usaha Kecil Menengah (Studi Kasus pada Toko Barkha. Jurnal Indonesia Membangun. vol. 17. no. 3.
Darmawan, R. Dkk. 2017. Identifikasi Risiko Kecelakaan Kerja dengan Metode Hazard Identification And Risk Assesment (HIRA) di Area Batching Plant PT XYZ. Jurusan Teknik Industri, Fakultas Teknik, Universitas Sultan Ageng Tirtayasa.
Levi, A, 2017. Usulan perbaikan Keselamatan Kerja Dengan Menggunakan Metode Job Safety Analysis (JSA) Dan Failure Mode and Effect Analysis (FMEA). Spektrum Industri. vol. 15. no. 2.
Masir, Abidin, S. 2018,.Analisis Pengawasan Ketenagakerjaan Jasa Konstruksi Terhadap Keselamatan Jasa Konstruksi (Studi Kasus pada Dinas Tenaga Kerja dan Transmigrasi Provinsi Kalimantan Utara). Borneo Engineering: Jurnal Teknik Sipil. vol. 2. no. 1.
Pertiwi, W. Apriyani, A. 2019. Pengaruh Program K3 (Kesehatan dan Keselamatan Kerja) Terhadap Produktivitas Kerja Karyawan Di PT. Kereta Api Indonesia (Persero) Daerah Operasi 3 Cirebon. ExChall. vol. 1. no. 1.
Purnitasari Intan, D. 2018. Analisa potensi Bahaya Kerja Produksi Gula Dengan Metode Hazard Identification and Risk Assessment (HIRA) dan Fault Tree Analysis (FTA). Universitas Muhammadiyah Malang.
Rausand, M, D. 2011. Risk Assessment Theory, Methods, and Applications. Canada.
Santoso. G. 2004. Manajemen Keselamatan & Kesehatan Kerja. Jakarta.
Soputan, M. E. G, dkk, 2014. Manajemen Risiko Kesehatan dan Keselamatan Kerja (K3) (Study Kasus pada Pembangunan Gedung SMA Eben Haezar). Jurnal Ilmiah Media Engineering, vol. 4, no. 4.
Suma’mur. 1981. Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta.
Waruwu, S. Yuamita, F, dkk. 2014. Analisis Faktor Kesehatan dan Keselamatan Kerja (K3) yang Signifikan Mempengaruhi Kecelakaan Kerja pada Proyek Pembangunan Apartement Student Castle. Spektrum Industri. vol. 14, no. 1.