ANALISIS PENCEGAHAN BAHAYA PADA BENGKEL BUBUT PT HARMAIN (STUDI KASUS: DOCKYARD BALIKPAPAN – MARINE SERVICE SHIPPING PT PERTAMINA (PERSERO) RU V

Authors

  • Patunru Pongky Universitas Balikpapan
  • Hardiyono Universitas Balikpapan
  • Sri Purwanti Universitas Balikpapan
  • Herman Universitas Balikpapan

DOI:

https://doi.org/10.36277/identifikasi.v9i1.268

Keywords:

Pencegahan, Bahaya

Abstract

Abstrak : Along with the increasing volume of work in the lathe workshop will also increase the risk of accidents that will occur as observed in the turning work. This study aims to determine the level of risk of accidents in the lathe workshop while doing the lathe work. This research is a qualitative research and assessment of the risk level of accidents with risk assessment which in this study refers to ISO 31000. The results showed that the percentage incidence of workplace accidents at the lathe workshop found work turning up ranked first with a percentage of 18.5% and ranking the second is occupied by cutting work using a lathe with an accident percentage of 14.3% with risk ranking and hazard level with a value of 5C / 15. Prevention of results of determination of risk ranking and hazard level for risk assessment identification is emphasized through the approach to improving labor qualifications, tool certification, use of assistive devices and transport, building energy-saving programs, applying SOP and JSA, effective use of PPE and dissemination of HSE implementation

References

Atmoko,Tjipto. 2011 – Standar Operasional Prosedure (SOP)

Jhon ridley, 2009.” Kesehatan Dan Keselamatan Kerja: Ikhtisar (Edisi 3)

Bird dan Germain, 1990." Job-Safety Analysis – American Society of Safety Engineers.

Sahab, Syukri.1997. Manajemen Keselamatan Kerja. Jakarta.

Kolluru, Sharwan. 1996, “ Risk Assesment and Management Hand Book for Enviromental, Health and Safety Profesionals”

Silalahi, Bennet N. B (dan) Silalahi, Rumondang. 1985.” Manajemen Keselamatan dn Kesehatan Kerja”. Pustaka Binaman Pressindo

Suma’mur P.K. 1993.“Keselamatan Kerja dan Pencegahan Kecelakaan” Jakarta Gunung Agung

OHSAS 18001 : 2007. “ Occupational Health and Safety Management System Requirement”

Peraturan Menteri Tenaga Kerja Nomor : PER.05/MEN/1996 “ Tentang Sistem Manajeman Keselamatan dan Kesehatan Kerja”

Peraturan Pemerintah No. 50 Tahun 2012 – Sistem Manajemen Keselamatan dan Kesehatan Kerja

Suma’mur P.K. 1991.“Heigine perusahaan dan kesehatan kerja ” Haji Masagung

Silalahi, Bennet N. B (dan) Silalahi, Rumondang. 1991.” Manajemen Keselamatan dn Kesehatan Kerja”. Pustaka BinamanPressindo

Ramli.Soehatman. 2010.” Sistem Manajemen Keselamatan dan kesehatan kerja – OHSAS 18001”

Sugiyono. (2012). Memahami Penelitian Kualitatif”. Bandung : ALFABETA.

Tarwaka. 2008. “ Keselamatan dan Kesehatan Kerja “

Silalahi, Bennet N. B (dan) Silalahi, Rumondang. 1995.” Manajemen Keselamatan dn Kesehatan Kerja”. Pustaka BinamanPressindo

Tarwaka 2010, "Dasar-Dasar PengetahuanErgonomi Dan Aplikasi Di Tempat Kerja”

Undang-Undang No 1 tahun 1970 “ Tentang Keselamatan Kerja “

Downloads

Published

2023-08-27

How to Cite

Pongky, P. ., Hardiyono, H., Purwanti, S., & Herman, H. (2023). ANALISIS PENCEGAHAN BAHAYA PADA BENGKEL BUBUT PT HARMAIN (STUDI KASUS: DOCKYARD BALIKPAPAN – MARINE SERVICE SHIPPING PT PERTAMINA (PERSERO) RU V. IDENTIFIKASI, 9(1), 781–786. https://doi.org/10.36277/identifikasi.v9i1.268

Issue

Vol. 9 No. 1 (2023): IDENTIFIKASI

Section

Jurnal Penelitian

License

Copyright (c) 2023 IDENTIFIKASI

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.