PENGARUH KEPATUHAN DAN PENGETAHUAN RAMBU KESELAMATAN TERHADAP KESELAMATAN KERJA DI LABORATORIUM PT GEOSERVICES BALIKPAPAN

  • Hardiyono Hardiyono Universitas Balikpapan
Keywords: Occupational safety, worker compliance, worker knowledge

Abstract

Analysis of the level of compliance and knowledge of employees with the protection of safety signs, whether it affects the level of awareness of workers on the danger of working safety at PT Geoservices Balikpapan. The method used in this study is a method with a quantitative approach through questionnaires and then in view of a qualitative approach through observation and interviews aiming to get a full picture of the influence Compliance and knowledge of occupational safety. There is a result of a double linear association which is: Y = 2,782 +1, 000X1 +1, 000X2 which if the relationship of constant coefficient a = 2,782 indicate that if compliance and knowledge remain/do not experience addition or subtraction, then occupational and safety constant value of 2.782. Each increment of one unit of safety signs compliance then occupational safety will increase by 1,000. Each increase in knowledge of safety signs of one unit and then safety will increase by 1,000. In addition, there is a percentage result of the tested coefficient of determination which is used to determine how large the percentage of contributions of independent variable influence simultaneously on its dependencies variable. This is shown with the result of a coefficient of determination in the level of knowledge on occupational safety shows the value of 0,643 so that the contribution of the knowledge independent variable of 64,3% to the dependent variable of occupational safety While the rest is 35,7% in influence other factors.

Author Biography

Hardiyono Hardiyono, Universitas Balikpapan

Program Studi Keselamatan dan Kesehatan Kerja Fakultas Vokasi Universitas Balikpapan

References

Abdurrahman, S, 2013, Modul Kesehatan dan Keselamatan Kerja (pp. 26). Rosslyn: National Electrical Manufactures Association. Electrical Manufactures Association (NEMA).
Alijoyo, Antonius, 2005, Enterprise Risk Management, Pendekatan Praktis. Ray Indonesia. Australia Standars/New Zaeland. 2004. Risk Management 4360. Standard
ANSI Standard, 2007, ANSI Z535.4-2007 for Product Safety Sign and Labels.
ANSI Standard, 2011, ANSI Z535.3-2011 Criteria for Safety Symbol. National
B. Miles, Matthew & Huberman, A. Michael, 1992, Analisis Data Kualitatif. Terjemahan Tjetjep Rohendi Rohidi, UI Press, Jakarta.
Cahyani, P, 2009, Pemetaan Sistem Organisasi Sebagai Refleksi Budaya Keselamatan Kerja (Safety Culture) Industri Manufaktur Indonesia. Institut Teknologi Bandung, Bandung.
Evianti, Anggun Lestari, 2014. Kesesuaian Keberadaan Safety Sign Berdasarkan Identifikasi Bahaya Di PT Dirgantara Indonesia, UIN, Jakarta.
Herdiansyah, Haris, 2011, Metodologi Penelitian Kulitatif. Salemba Humanika, Jakarta.
Juliana, Anda Ivana, 2008, Implementasi Metode Hazops dalam Proses Identifikasi Bahaya dan Analisa Risiko Pada Feedwater System di Unit Pembangkitan Paiton PT. PJB. Surabaya: Politeknik Perkapalan Negeri Surabaya.
Ramli, S, 2010, Manajemen Risiko Dalam Perspektif K3 OHS Risk Management. Dian Rakyat. Jakarta.
Ramli, S. 2010b. Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001 (Vol. 01), Dian Rakyat, Jakarta.
Tarwaka. 2008. Manajemen dan Implementasi K3 di Tempat Kerja. Harapan Press, Surkarta.
Published
2019-06-30
How to Cite
Hardiyono, H. (2019, June 30). PENGARUH KEPATUHAN DAN PENGETAHUAN RAMBU KESELAMATAN TERHADAP KESELAMATAN KERJA DI LABORATORIUM PT GEOSERVICES BALIKPAPAN. IDENTIFIKASI: Jurnal Ilmiah Keselamatan, Kesehatan Kerja Dan Lindungan Lingkungan, 5(1), 27-32. https://doi.org/https://doi.org/10.36277/identifikasi.v5i1.79
Section
Articles